Product
News
- Precautions for long-term storage of hydraulic breaker in winter ?
- Winter Maintenance Precautions for Hydraulic Breakers
- Essential Maintenance Accessories for Soosan Breakers: Piston, Flat Pin, Bushings, and Oil Seal
- In-depth analysis and solutions for the problem of slight cylinder pulling of hydraulic breaker
- Resolving Insufficient Impact Frequency in Hydraulic Breaker Hammers: Causes and Solutions
- Troubleshooting Guide: Addressing Reduced Impact Force in Hydraulic Breakers
contacts
Contacts:Jacky Zhang
Phone:+8618937103255
Email:hanyunpsq@gmail.com
Address:No. 167, Xuchang Road, Shangjie District, Zhengzhou City
News
Precautions for long-term storage of hydraulic breaker in winter ?
In winter, when your hydraulic breaker needs to be idle for a long time, proper storage is crucial. Here are some simple and effective storage suggestions to protect your equipment from damage while improving its visibility in Google search.
1. Environment selection: Prefer dry and well-ventilated indoor environment for storage, avoid humid and saline environment. If it must be stored outdoors, make sure the location is well drained and covered with waterproof cloth.
2. Release pressure: Before long-term storage, release the nitrogen in the breaker and push the piston into the middle cylinder to reduce internal pressure and prevent component deformation.
3. Cleaning and rust prevention: Clean the dirt on the hammer body and apply rust-proof oil to the bottom of the piston, drill rod bushing and other rust-prone parts. At the same time, check and replace the hydraulic oil seal to prevent oil leakage.
4. Hydraulic oil management: Check the cleanliness and amount of hydraulic oil to ensure no leakage and contamination. Although the hydraulic oil does not need to be replaced during storage, it is important to keep it clean.
5. Vertical storage: Store the hydraulic breaker vertically and prevent it from tipping over by proper fixing. Vertical storage helps reduce the risk of piston seal damage.
6. Regular inspection: Even during storage, the wear of the hammer's consumable parts, such as pistons and drill rods, should be checked regularly. Develop a maintenance plan, including warm-up and inspection procedures before the next use.
By following these simple storage recommendations, you can effectively extend the service life of your hydraulic breaker and reduce the failure rate. At the same time, these practical maintenance tips will also improve your equipment's ranking and traffic in Google searches, attracting more potential users. Remember, proper storage and maintenance are an investment in the future of your equipment.
-
2025-01-09 17:29:50
Precautions for long-term storage of hydraulic breaker in winter ?
-
2025-01-03 17:23:02
Winter Maintenance Precautions for Hydraulic Breakers